¡@
¡@
ELECTRICAL RISING BARRIER
¡@
Model¡GWw-100
¡@


Description

The Ww-100 series of barrier is designed to control the flow of traffic in some of the restricted areas, usually in low to high security access such as:

¡EIndustrial parking area
¡EToll way
¡EAirports
¡ESport stadiums
¡EPrivate premises
¡ETunnel
¡EAmusement Park

Housing

The 370 x 280 x 1160 weather-proof housing of stainless steel sheet of 1.5mm thickness. (Optional: Thickness -
2mm or above). The base frame is robust & highly resistant to corrosion.

Access to the control is protected by a security lock in the front side of the arm with easily maintenance. 

Technology

¡ELimitation of mechanism at 900
¡EFast operating speed with 2 sec.at 900
¡ERotating up-down cycle within 1000
¡EAdvance Proximity Sensor Switch.
¡EInternal structure receiving the reduction-gear motor & the arm pivot shaft.

Features

¡E40 x 80 mm of Octagonal aluminum boom coated in White laminated with Red reflective film.
¡ERubber safety cushion.
¡ERotating up-down cycle within 1000
¡EArm length of 3 Meters.
¡EBarrier-arm may locked in any positions by gear box limiter.
¡EMagnetic Torgue motor prevents condensation & corrosion.  

Options

¡EConnect to card reader.
¡EConnect to Ticket Dispenser.
¡EAutomatic closing logic control relay with wire loop detector.
¡EArm lighting (Amber/Red).
¡E¡§STOP¡¨ sign.
¡EGrille (Skirt).
¡EFolding-arm. (For limited roof height).

Technical Data
Power consumption: 200W
Weight: 60 Kg.
Voltage: AC 220V Frequency: 50-60 Hz
R.H.: 20% -98%.
Standard Opening/Closing speed: approx. 2.5 sec.
Temperature: 00 to 500 C (Accessories may needed below 0 ¢J.)
¡@


| Home | Back |
¡@
This site is best viewed using Internet Explorer 5.0 or above and Flash 5 Plug-in.
Copyright(c) 2004, ACE Automatic System (H.K.) Co. All Rights Reserved.